+39-0535-27833        sales@tecnasrl.com
it-ITen-US

PROVASET T3D

Provaset T3D differential leak tester
Main features
Leak tests up to 30 bar and in vacuum
Resolution 0.1 Pa
3.5” colour touchscreen display
100 test programs with sequential mode
Electronic pressure regulator
RS232/RS485, USB, Ethernet and digital I/O interfaces
Real time SPC statistics

Do you need more information? Contact us!
Mail to sales@tecnasrl.com
Call with skype or +39-0535-27833
(Office hour: 9am to 5pm CET)

Description

T3D is an innovative device for leak tests by pressure differential method.
By measuring the pressure difference between the product being tested and a reference sample, the test times are reduced and the sensitivity is heightened.
The touch interface, with a colour display and the real-time visualization of the tests, makes the programming and the use simple and immediate.Its high measurement resolution and the test accuracy, in combination with the electronic regulation of the filling pressure, allow to perform not only leak tests but also destructive burst tests, safety valves opening checks, volumetric control, obstruction tests and “in bell” tests on sealed products or by interception method.The control of external automation, the interface with barcode readers and printers and the possibility to record the tests on USB memories or via Ethernet, make it a complete and suitable instrument for the most modern production applications.

Options and Accessories
  • Setup for vacuum test
  • 2 programmable pneumatic outputs for external commands (plug/marker)
  • I/O expansion: adds digital PLC inputs/outputs (8+8) and a RS232/RS485 serial line
  • Additional USB, Ethernet, ProfiBUS or CANbus interfaces for remote control and data collection
  • Real time SPC statistical analysis
  • Software to manage a label printer and a barcode reader
  • Air filters
  • Certificated Leak Master to be inserted in the Staubli® connector
  • Barcode and/or printer
  • Remote control keypad
  • 3-colours indicator light with loud sound alert
  • External pneumatic module for vacuum generation
  • External valve for volume check and tests in sealed “bell”
  • Module for external pressure discharge


Customized programs for PC/HMI terminal

  • Software to collect and manage the data of the tests
  • Viewing and management of several testing stations
  • Parameter programming and SPC analysis of test data
  • Virtual Instrument for National Instruments LabViewTM available at request

    Calibration service

    Each equipment is accompanied by a calibration report released by Tecna srl.
    According to the requirements of ISO9001 standard, calibration must be verified at specified intervals against national or international test masters.
    Tecna srl, through its specialized personnel and certified instruments, offers a complete scheduled calibration service.


    Related Products

    TL80
    TL80
    DELTA P
    DELTA P
    MAV 100
    MAV 100
    LABEL PRINTER
    LABEL PRINTER
    BARCODE READER
    BARCODE READER
    TLC 02
    TLC 02
    DISPLAY OPERATOR
    DISPLAY OPERATOR
    tecna srl - via Statale Sud n°115 -  41037 Mirandola  -  Modena  -   Italy    -     tel +39 0535 27833  -  fax +39 0535 25436 - P.IVA e cod. fisc. 02207760360 
    SALES@tecnasrl.com    
    Copyright 2019 by Tecna srl Privacy Termini di utilizzo / Terms