DESCRIPTION
TM3PF is an instrument for measurement of pressure and flow in air, directly measures pressure and flow rate through the product being tested.
In particular TM3PF-CV is used for Check Valves and measures the peak pressure reached before the opening of the valve but also the pressure and the residual flow when the valve opens.
PERFORMANCES
Delta TM3PF is a pneumatic module with direct flow measurement for leak or flow testing.
The instrument directly measures pressure and flow rate through the product being tested (filters, taps, valves, ...). Testing times below 1 second can be reached for leak or flow rate tests on small volumes. It is available the dislocated pressure reading on the tested product.
TM3F – CV is an instrument to measure pressure and flow in air for Check Valves.
The instrument measures both the peak pressure reached before the opening of the valve and also the pressure and the residual flow when the valve opens. Before the test starts, the testing module checks the initial conditions of pressure and free output flow.
CONNECTIVITY
TM3PF has digital I/O interfaces for PLC connection, USB/RS485 for programming and for data collection, a software to collect and manage the tests data for PC.
This instrument can be connected and controlled by every PLC and interfaced to HMI terminal which is provided with serial lines, USB host and Ethernet interface.
The software manager permits to collect and manage tests data, to set up the parameters, programming and do SPC analysis of tests data.
BENEFITS
- Flow measurement: up to 160 l/min
Resolution: up to 0.01 cm3/min
- Full scale pression up to 10 bar
Resolution: up to 0.1 Pa
- Units of measure: cm3/min; cm3/h
- Up to 300 testing tables
- Digital I/O interfaces for PLC connection
- USB/RS485 for programming and for data collection
- HMI operator terminal available: 4.3” colour touch screen, with its own free software, that can handle up to 8 TM3 modules.
- HMI fully Interfaceable: USB – Serial lines RS485/232 – Ethernet
- Software Manager, dedicated for TM3 modules management data storage and statistical process, is available.
- External automations and devices control: Staubli connector – HMI terminal – vacuum generator – valve for volume control – pressure regulator – printer, barcode and QRcode reader.
TECH SPECS
|
Power Supply
|
24 Vdc - 1 A max
|
|
Compressed Air Line
|
Dry, non-condensing, 5-micron filtered and oil-free air, compliant with ISO8573-1; hose fittings 4x2.5/ 6x4 / 8x6 mm
Supply pressure compatible with the instrument’s full scale pressure
|
|
Sensor Calibration
|
Remote control software procedure with external masters
|
|
A/D Converter
|
24 bits
|
|
Pressure Regulator
|
External (option)
|
|
Indicators
|
4 LEDs: 2 yellow (test phases), green (passed), red (failed)
|
|
Test Counter
|
PASSED and FAILED totals, resettable to zero
|
|
Clock
|
Date and time, with supercap, 7 days back up max
|
|
Programmable
Parameters
|
up to 300 testing tables, general testing parameters
|
|
PLC Connections
|
2 photocoupled inputs: START / RESET
4 photocoupled outputs: TEST RUNNING, PASSED, FAILED, ALARM
|
|
Data Interfaces
|
RS485/USB communication interfaces with Modbus protocol
RS232 interface to drive an external electronic pressure regulator
|
|
Staubli® Connector
|
Available on external connection for leak masters (option)
|
|
Housing
|
Unpainted aluminium
|
