+39-0535-27833        sales@tecnasrl.com
it-ITen-US

DELTA TM3F

Delta TM3F leak and flow rate tester
Main features
Flow tests from 25 cm3/min up to 200 l/min
Resolution up to 0.01 cm3/min
Full scale pressure up to 10 bar
Resolution up to 0.1 Pa
Extremely quick testing
Reliable pneumatic circuit
Digital interface for PLC
RS485/USB communication interfaces
300 test tables

Do you need more information? Contact us!
Mail to sales@tecnasrl.com
Call with skype or +39-0535-27833
(Office hour: 9am to 5pm CET)

Description

 

TM3PF: Measurements of pressure and flow in air

 

The instrument directly measures pressure and flow rate through the product being tested (filters, taps,valves, ...). For leak or flow rate tests on small volumes, testing times below 1 second can be reached.

Dislocated pressure reading on the tested product is available.

 

TM3PF-CV: Measurements of pressure and flow in air for check valves

 

The instrument measures the peak pressure reached before the opening of the valve and also the pressure and the residual flow when the valve opens.

Before the test starts, the testing module checks the initial conditions of pressure and free output flow. Customized test cycles are available.

 

TM3PQ: Leak tests with direct measure of the flow rate

 

By using an internal volume, the instrument can measure the leak rate and also control the volume of the tested product.

 


Accessories

Pressure regulators
External module for vacuum generation
3-colours indicator light with loud sound alert
Air filters
Fixing brackets
Staubli® connector assembled on a T fitting to join a Leak Master
 


Customized software for HMI terminal/PC

Software to collect and manage the data of the tests.
Viewing and management of several testing stations.
Parameter programming and SPC analysis of test data.
Virtual Instrument for National Instruments LabViewTM available at request.


    Calibration service

    Each equipment is accompanied by a calibration report released by Tecna srl.
    According to the requirements of ISO9001 standard, calibration must be verified at specified intervals against national or international test masters.
    Tecna srl, through its own specialized personnel and certified instruments, offers a complete scheduled calibration service.


    Documents


    Related Products

    DELTA TM3P
    DELTA TM3P
    DELTA PF
    DELTA PF
    DELTA F
    DELTA F
    LEAK MASTER
    LEAK MASTER
    TL80
    TL80
    DISPLAY OPERATOR
    DISPLAY OPERATOR
    tecna srl - via Statale Sud n°115 -  41037 Mirandola  -  Modena  -   Italy    -     tel +39 0535 27833  -  fax +39 0535 25436 - P.IVA e cod. fisc. 02207760360 
    info@tecnasrl.com    
    Copyright 2019 by Tecna srl Privacy Termini di utilizzo / Terms