Leak tester by absolute pressure decay

T3P

T3P is an innovative device for leak tests by absolute pressure decay measurement.
The touch interface, with the color display and the testing real-time view, make the programming and use simple and immediate.

DESCRIPTION
BENEFITS
TECH SPECS
Contact us

DESCRIPTION

Its high measurement resolution and test accuracy, together with the electronic regulation of the filling pressure, allow to perform not only leak tests but also destructive burst test, safety valves opening checks, volumetric control, obstruction tests and “in bell” tests on sealed products or by interception method.The control of external automation, the interface with barcode readers and printers and the possibility to record the tests on USB memories or via Ethernet make it a complete and suitable instrument for the most modern production applications.

BENEFITS

Double channel circuit
Setup for vacuum test
2 programmable pneumatic outputs for external commands (coupler/marker)
I/O expansion: adds digital PLC inputs/outputs (8+8) and a RS232/RS485 serial line
Additional USB, Ethernet, ProfiBUS or CANbus interfaces for remote control and data collection
Real time SPC statistical analysis
Software to manage a label printer and a barcode reader
Air filters
Certificated Leak Master to be inserted in the Staubli® connector
Holders for burst test
Barcode and/or printer
Remote control keypad
3-colours indicator light with loud sound alert
External pneumatic module for vacuum generation
External valve for volume check and tests in sealed “bell”
Module for external discharge

TECH SPECS

Power supply	External 24 Vdc; alternatively, 85÷264 Vac, 35W
Compressed air line	Dry, non-condensing, 5-micron filtered and oil-free air, compliant with ISO8573-1
Sensor calibration	Software-guided procedure with primary instruments.
A/D converter	24 bits
Pressure Regulator	Dedicated pressure transducer to visualize the regulated pressure on the display Available electronic or manual pressure regulator
Keyboard	Resistive touch screen
Display	3.5” colour TFT LCD display with touchscreen
Indicators	4 LED lights (testing phases, pass/reject outcome)
Test counter	Passed and Rejected totals, resettable to zero Statistic option: mean value, minimum, maximum, standard deviation, normal distribution, CP, CPK, hour production totals
Audible alarm	Built-in beeper with programmable duration
Clock	Date and time, with supercap, max autonomy 7 days
Programmable parameters	100 testing tables with sequential mode, general parameters, volume calculation to indicate the leak rate in cm3/min or cm3/h
PLC connections	8 photocoupled inputs and 8 photocoupled outputs Each I/O is fully programmable Control of external automation (coupling, security cage...) without PLC
Data interfaces	Configurable RS232/RS485 serial lines USB device interface Protocols: Modbus RTU, CSV ASCII output, barcode, printer
Staubli® Connector	Standard, for Leak Masters
Housing	Unpainted anodized aluminium, ABS